Shermco Industries

Troubleshooting & Electrical Print Reading
2025-09-18 08:00 - 2025-09-19 16:00 (America/New_York)
TUITION: $850*
DURATION: 2 Days (8 am – 4 pm)
CEU: 1.6 Units
PREREQUISITES: Attendees should have basic electrical training. Some field experience is recommended, but not mandatory.
COURSE DESCRIPTION:
This fundamental course was developed for technicians and managers who need to understand electrical power systems: how they are designed, what can go wrong, and how to find the problem areas. Several types of drawings and schematics are explained, and hands-on exercises will demonstrate their practical use for basic troubleshooting.
*Tuition price is for open enrollments, does not include costs for on-site bookings
COURSE LEARNING OBJECTIVES:

Types of electrical system drawings, the basic layout and the purpose of each.
Legends used on electrical drawings.
Understanding and identify typical electrical symbols.
Standard ANSI/IEEE device numbers.
How circuits and devices interact with each other.
To understand the “logic” functions in electromechanical control systems.
To troubleshoot electrical problems using elementary diagrams, one-line diagrams, and Schematics.
To understand device functions and system operations such as circuit breaker and motor controls and transfer schemes.
Hands-on (~30%) training program augmented with round-table discussions, and perform practical exercises using elementary diagrams, one-line diagrams and schematics.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply

Canada ESQEW (Virtual)
2025-09-23 08:00 - 2025-09-24 16:00 (America/Chicago)
Tuition: $1195*
Duration: 2 Days (8am – 4pm each day)
CEU: 1.6 Units
Prerequisites: It is recommended, but not mandatory that attendees should have some basic electrical training and field experience.
COURSE DESCRIPTION:
Designed for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA- mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications.
*Tuition price is for open enrollments, does not include costs for on-site bookings.
COURSE LEARNING OBJECTIVES:

Recognize, understand and avoid electrical hazards and risks (shock, arc flash, and arc blast)
How to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.
Safe work practices for work on or near metal clad switchgear, substations, motor control centers, medium-voltage motor starters and facility electrical systems.
How to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.
Proper selection, maintenance, testing, use, and storage of PPE. Learn their purposes and limitations.
How to inspect insulated tools and understand their limitations of use
How to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.
How to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.
How to perform absence-of voltage testing to help ensure an electrically safe work condition.
Review OSHA/CSA Electrical Safety
Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110, 12 and 130).
Understand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety for Qualified Electrical Workers
2025-09-23 08:00 - 2025-09-24 16:00, 2025-10-07 08:00 - 2025-10-08 16:00, 2025-10-21 08:00 - 2025-10-22 16:00, 2025-11-04 08:00 - 2025-11-05 16:00, 2025-11-18 08:00 - 2025-11-19 16:00, 2025-12-02 08:00 - 2025-12-03 16:00 (America/New_York)
Tuition: $850*
Duration: 2 Days (8am – 4pm each day)
CEU: 1.6 Units
Prerequisites: It is recommended, but not mandatory that attendees should have some basic electrical training and field experience.
COURSE DESCRIPTION:
Designed for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications.
*Tuition price is for open enrollments, does not include costs for on-site bookings
COURSE LEARNING OBJECTIVES:

Recognize, understand and avoid electrical hazards and risks (shock, arc flash, and arc blast)
How to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.
Safe work practices for work on or near metal clad switchgear, substations, motor control centers, medium-voltage motor starters and facility electrical systems.
How to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.
Proper selection, maintenance, testing, use, and storage of PPE. Learn their purposes and limitations.
How to inspect insulated tools and understand their limitations of use
How to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.
How to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.
How to perform absence-of-voltage testing to help ensure an electrically safe work condition.
Review OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110, 12 and 130.
Understand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety for Qualified Electrical Workers (Virtual)
2025-09-23 08:00 - 2025-09-24 16:00, 2025-10-07 08:00 - 2025-10-08 16:00, 2025-10-21 08:00 - 2025-10-22 16:00, 2025-11-04 08:00 - 2025-11-05 16:00, 2025-11-18 08:00 - 2025-11-19 16:00 (America/New_York)

Electrical Safety for Qualified Electrical Workers Labs
2025-09-25 08:00 - 16:00, 2025-10-23 08:00 - 16:00 (America/New_York)
TUITION: $575*
DURATION: 1 Day (8am – 4pm)
CEU: 0.8 Units
PREREQUISITES: Electrical Safety for Qualified Electrical Workers
COURSE DESCRIPTION
Technicians and supervisors are often hesitant to perform tasks on medium-voltage equipment without some prior training or experience. This one-day lab session pulls all the pieces together for planning and executing specific tasks on medium-voltage energized equipment. A planning session is followed by hands-on practice in Shermco’s training substation under the supervision of our field-experienced instructors.
*Tuition price is for open enrollments, does not include costs for on-site bookings.
COURSE LEARNING OBJECTIVES:

Focusing on medium-voltage applications.
How to assemble all the components of an electrical safety program into a practical job plan.
Hazard identification and risk assessment.
Absence of voltage testing of medium-voltage switchgear.
Grounding of medium-voltage switchgear.
Changing medium-voltage air-switch fuses.
Inserting and removing (racking) medium-voltage circuit breakers.
Inspection of PPE and arc-rated clothing.

Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
2025-09-25 08:00 - 16:00, 2025-10-23 08:00 - 16:00 (America/New_York)
TUITION: $550*
DURATION: 1 Day (8am – 4pm)
CEU: 0.8 Units
PREREQUISITES: Attendees should have completed OSHA/CSA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent).
COURSE DESCRIPTION:
This one-day class is designed for those who have previously met the OSHA/CSA-mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3).
*Tuition price is for open enrollments, does not include costs for on-site bookings.
COURSE LEARNING OBJECTIVES:

Electrical hazards and safety procedures for work on metalclad switchgear, substations, motor control centers and facility electrical systems.
Proper selection, maintenance and use of required PPE.
Energized and de-energized work policy and LOTO requirements.
Safe use of portable electrical equipment, including inspection and testing.
Review of OSHA/CSA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110, 120 and 130 of the NFPA 70E.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety for Non-Electrical Personnel (Virtual)
2025-09-26 08:00 - 16:00, 2025-10-24 08:00 - 16:00, 2025-11-21 08:00 - 16:00 (America/New_York)
TUITION: $550*
DURATION: 1 Day (8am – 4pm)
CEU: 0.8 Units
PREREQUISITES: None
COURSE DESCRIPTION:
Virtually every worker on an industrial or commercial job site works with or uses electrically powered equipment. Most of these workers have no concept of the hazards they could possibly be exposed to by performing common, everyday tasks. Jewelry contacting energized components, overstressed power strips, coffee pots, and heaters placed into the workplace all can increase the risk to the employee and to production if the worker is not aware of the potential issues involved. This course covers common situations that could place the non-electrical worker into dangerous situations. This course is primarily designed to meet the training requirements in NFPA 70E Section 110.2(A)(1)(C)(2).
*Tuition price is for open enrollments, does not include costs for on-site bookings.
COURSE LEARNING OBJECTIVES:

Review of electrical hazards, their causes and the potential for injuries and fatalities.
Understand how to avoid these hazards.
Common situations that can increase risk to workers.
OSHA/CSA electrical safety-related work practices regulation as it applies to non-electrical personnel.
Understand electrical LOTO and the Safe Work Zone.
Understand applicable OSHA/CSA regulations for non-electrical workers.
Understand and apply NFPA 70E requirements for unqualified persons.
Understand the safe approach distances for shock, arc flash, arc-blast and the purpose of a safe work zone.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Troubleshooting & Electrical Print Reading
2025-10-02 08:00 - 2025-10-03 16:00 (America/New_York)
TUITION: $850
DURATION: 2 Day (8am – 4pm)
CEU: 1.6 Units
Location: Irving TX
PREREQUISITES: Students should have basic electrical training. Some field experience is recommended but not mandatory.
COURSE DESCRIPTION:
This fundamental course was developed for technicians and managers who need to understand electrical power systems: how they are designed, what can go wrong and how to find the problem areas. Several types of drawings and schematics are explained, and hands-on exercises will demonstrate their practical use for basic troubleshooting.
*Tuition price is for open enrollments, does not include costs for on-site bookings.
COURSE LEARNING OBJECTIVES:

Types of electrical system drawings, the basic layout and the purpose of each.
Legends used on electrical drawings
Understanding and identify typical electrical symbols
Standard ANSI/IEEE device numbers
How circuits and devices interact with each other
To understand the “logic” functions in electromechanical control systems
To troubleshoot electrical problems using elementary diagrams, one-line diagrams and Schematics.
To understand device functions and system operations such as circuit breaker and motor controls and transfer schemes.
Hands-on (~30%) training program augmented with round-table discussions, and perform practical exercises using elementary diagrams, one-line diagrams and schematics.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety for Qualified Electrical Workers Labs
2025-10-09 08:00 - 16:00, 2025-11-06 08:00 - 16:00, 2025-11-20 08:00 - 16:00 (America/New_York)
Tuition: $575*
Duration: 1 Day (8am – 4pm)
CEU: .8 Units
Location: Irving TX
Prerequisites: Electrical Safety for Qualified Electrical Workers training course.
COURSE DESCRIPTION:
Technicians and supervisors are often hesitant to perform tasks on medium- voltage equipment without some prior training or experience. This one-day lab session pulls all the pieces together for planning and executing specific tasks on medium-voltage energized equipment. A planning session is followed by hands-on practice in Shermco’s training substation under the supervision of our field-experienced instructors.
*Tuition price is for open enrollments, does not include costs for on-site bookings
COURSE LEARNING OBJECTIVES:

Focusing on medium-voltage applications
How to assemble all the components of an electrical safety program into a practical job plan
Hazard identification and risk assessment
Absence of voltage testing of medium-voltage switchgear
Grounding of medium-voltage switchgear
Changing medium-voltage air-switch fuses
Inserting and removing (racking) medium-voltage circuit breakers
Inspection of PPE and arc-rated clothing

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
2025-10-09 08:00 - 16:00, 2025-11-20 08:00 - 16:00 (America/New_York)
Tuition: $550*
Duration: 1 Days (8am – 4pm)
CEU: .8 Units
Location: Virtual
Prerequisites: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent).
COURSE DESCRIPTION:
This one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3).
*Tuition price is for open enrollments, does not include costs for on-site bookings
COURSE LEARNING OBJECTIVES:

Electrical hazards and safety procedures for work on metal-clad switchgear, substations, motor control centers and facility electrical systems.
Proper selection, maintenance and use of required personal protective equipment (PPE).
Energized and de-energized work policy and lockout/tagout (LOTO) requirements
Safe use of portable electrical equipment, including inspection and testing.
Review of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110, 120 and 130 of the NFPA 70E

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety for Managers & Supervisors (Virtual)
2025-10-10 08:00 - 16:00, 2025-11-07 08:00 - 16:00 (America/New_York)
TUITION: $550*
DURATION: 1 Day (8am – 4pm)
CEU: 0.8 Units
PREREQUISITES: None
COURSE DESCRIPTION:
As is often the case, supervisors, managers, and engineers who are responsible for plant maintenance are not actually the individuals performing hands-on maintenance operations. However, it is critical that they understand workplace safety policies and regulations so they can plan for the direction and training requirements of maintenance staff and assure that proper PPE, LOTO, and other safety procedures are well understood and followed.
*Tuition price is for open enrollments, does not include costs for on-site bookings.
COURSE LEARNING OBJECTIVES:

How electrical hazards in the can affect your personnel, your company and those responsible for electrical workers.
Recognize electrical safety hazards and plan a course of action to address each one.
OSHA/CSA regulations and NFPA 70E requirements for taking specific measures to prevent electrical hazards from causing injury or death.
Electrical hazard awareness and recognition.
Managing liability created by electrical hazards.
Designing and implementing an Electrical Safety Program (ESP) including policies, safe work procedures and permits, hazard analysis, risk assessments and reduction, training, PPE and other written program documents.
Performing an electrical hazard/risk analysis.
Using the NFPA 70E to interpret hazard/risk category classification (HRC) of a given task and assure adequate PPE.
How to incorporate changes implemented by the NFPA 70E update.
Identify the steps needed to protect employees who work on or near energized parts.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Industrial Plant Electrical Maintenance
2025-10-14 08:00 - 2025-10-17 16:00 (America/New_York)
TUITION: $1420*
DURATION: 4 Day (8am – 4pm)
CEU: 3.2 Units
Location: Irving TX
PREREQUISITES: Students should have basic electrical training. Some field experience is recommended but not mandatory.
COURSE DESCRIPTION:
This course covers what maintenance personnel and managers should know about electrical maintenance and how it affects plant reliability. The maintenance and testing required for common plant devices, including transformers, protective relays, circuit breakers, cubicle maintenance, motors and motor controls is covered in detail. Based on the NFPA 70E or B and ANSI/NETA Maintenance Testing Specifications, this intensive training program provides the latest information on maintaining and testing electrical power system equipment, including what to do, when to do it and interpreting test results.
*Tuition price is for open enrollments, does not include costs for on-site bookings.
COURSE LEARNING OBJECTIVES:

Low- and medium-voltage circuit breakers.
Motor maintenance
Switches and disconnects.
Transformer maintenance and testing.
How to interpret results and trend analysis.
How to improve plant reliability through common-sense approaches to operation and maintenance.
How to lower operation and maintenance cost.
How maintenance planning can reduce unscheduled downtime.
Hands-on (~40%) training program augmented with round-table discussions.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety for Qualified Electrical Workers Refresher
2025-11-06 08:00 - 16:00 (America/New_York)
