Industrial Plant Electrical Maintenance
2025-12-09 08:00 - 2025-12-12 16:00 (America/New_York)
TUITION: $1420*
DURATION: 4 Day (8am – 4pm)
CEU: 3.2 Units
PREREQUISITES: Students should have basic electrical training. Some field experience is recommended but not mandatory.
COURSE DESCRIPTION:
This course covers what maintenance personnel and managers should know about electrical maintenance and how it affects plant reliability. The maintenance and testing required for common plant devices, including transformers, protective relays, circuit breakers, cubicle maintenance, motors and motor controls is covered in detail. Based on the NFPA 70E or B and ANSI/NETA Maintenance Testing Specifications, this intensive training program provides the latest information on maintaining and testing electrical power system equipment, including what to do, when to do it and interpreting test results.
*Tuition price is for open enrollments, does not include costs for on-site bookings.
COURSE LEARNING OBJECTIVES:

Low- and medium-voltage circuit breakers.
Motor maintenance
Switches and disconnects.
Transformer maintenance and testing.
How to interpret results and trend analysis.
How to improve plant reliability through common-sense approaches to operation and maintenance.
How to lower operation and maintenance cost.
How maintenance planning can reduce unscheduled downtime.
Hands-on (~40%) training program augmented with round-table discussions.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety for Qualified Electrical Workers (Virtual)
2025-12-16 08:00 - 2025-12-17 16:00
Tuition: $850*
Duration: 2 Days (8am – 4pm each day)
CEU: 1.6 Units
Prerequisites: It is recommended, but not mandatory that attendees should have some basic electrical training and field experience.
COURSE DESCRIPTION:
Designed for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications.
*Tuition price is for open enrollments, does not include costs for on-site bookings
COURSE LEARNING OBJECTIVES:

Recognize, understand and avoid electrical hazards and risks (shock, arc flash, and arc blast)
How to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.
Safe work practices for work on or near metal clad switchgear, substations, motor control centers, medium-voltage motor starters and facility electrical systems.
How to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.
Proper selection, maintenance, testing, use, and storage of PPE. Learn their purposes and limitations.
How to inspect insulated tools and understand their limitations of use
How to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.
How to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.
How to perform absence-of-voltage testing to help ensure an electrically safe work condition.
Review OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110, 12 and 130.
Understand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety for Qualified Electrical Workers
2025-12-16 08:00 - 2025-12-17 16:00

Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
2025-12-18 08:00 - 16:00
Tuition: $550*
Duration: 1 Days (8am – 4pm)
CEU: .8 Units
Location: Virtual
Prerequisites: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent).
COURSE DESCRIPTION:
This one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3).
*Tuition price is for open enrollments, does not include costs for on-site bookings
COURSE LEARNING OBJECTIVES:

Electrical hazards and safety procedures for work on metal-clad switchgear, substations, motor control centers and facility electrical systems.
Proper selection, maintenance and use of required personal protective equipment (PPE).
Energized and de-energized work policy and lockout/tagout (LOTO) requirements
Safe use of portable electrical equipment, including inspection and testing.
Review of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110, 120 and 130 of the NFPA 70E

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety for Qualified Electrical Workers Labs
2025-12-18 08:00 - 16:00
Tuition: $575*
Duration: 1 Day (8am – 4pm)
CEU: .8 Units
Location: Irving TX
Prerequisites: Electrical Safety for Qualified Electrical Workers training course.
COURSE DESCRIPTION:
Technicians and supervisors are often hesitant to perform tasks on medium- voltage equipment without some prior training or experience. This one-day lab session pulls all the pieces together for planning and executing specific tasks on medium-voltage energized equipment. A planning session is followed by hands-on practice in Shermco’s training substation under the supervision of our field-experienced instructors.
*Tuition price is for open enrollments, does not include costs for on-site bookings
COURSE LEARNING OBJECTIVES:

Focusing on medium-voltage applications
How to assemble all the components of an electrical safety program into a practical job plan
Hazard identification and risk assessment
Absence of voltage testing of medium-voltage switchgear
Grounding of medium-voltage switchgear
Changing medium-voltage air-switch fuses
Inserting and removing (racking) medium-voltage circuit breakers
Inspection of PPE and arc-rated clothing

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety for Non-Electrical Personnel (Virtual)
2025-12-19 08:00 - 16:00
TUITION: $550*
DURATION: 1 Day (8am – 4pm)
CEU: 0.8 Units
PREREQUISITES: None
COURSE DESCRIPTION:
Virtually every worker on an industrial or commercial job site works with or uses electrically powered equipment. Most of these workers have no concept of the hazards they could possibly be exposed to by performing common, everyday tasks. Jewelry contacting energized components, overstressed power strips, coffee pots, and heaters placed into the workplace all can increase the risk to the employee and to production if the worker is not aware of the potential issues involved. This course covers common situations that could place the non-electrical worker into dangerous situations. This course is primarily designed to meet the training requirements in NFPA 70E Section 110.2(A)(1)(C)(2).
*Tuition price is for open enrollments, does not include costs for on-site bookings.
COURSE LEARNING OBJECTIVES:

Review of electrical hazards, their causes and the potential for injuries and fatalities.
Understand how to avoid these hazards.
Common situations that can increase risk to workers.
OSHA/CSA electrical safety-related work practices regulation as it applies to non-electrical personnel.
Understand electrical LOTO and the Safe Work Zone.
Understand applicable OSHA/CSA regulations for non-electrical workers.
Understand and apply NFPA 70E requirements for unqualified persons.
Understand the safe approach distances for shock, arc flash, arc-blast and the purpose of a safe work zone.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety Refresher (Virtual)
2026-01-05 08:00 - 16:00, 2026-01-21 08:00 - 16:00, 2026-02-06 08:00 - 16:00, 2026-02-16 08:00 - 16:00, 2026-03-02 08:00 - 16:00, 2026-03-18 08:00 - 16:00

Electrical Safety in the Workplace (Virtual)
2026-01-06 08:00 - 2026-01-07 16:00, 2026-01-19 08:00 - 2026-01-20 16:00, 2026-02-04 08:00 - 2026-02-05 16:00, 2026-02-19 08:00 - 2026-02-20 16:00, 2026-03-03 08:00 - 2026-03-04 16:00, 2026-03-16 08:00 - 2026-03-17 16:00
Formerly Known As: ESQEW (Virtual)
Tuition: $850*
Duration: 2 Days (8am – 4pm each day)
CEU: 1.6 Units
Prerequisites: It is recommended, but not mandatory that attendees should have some basic electrical training and field experience.
COURSE DESCRIPTION:
Designed for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications.
*Tuition price is for open enrollments, does not include costs for on-site bookings
COURSE LEARNING OBJECTIVES:

Recognize, understand and avoid electrical hazards and risks (shock, arc flash, and arc blast)
How to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.
Safe work practices for work on or near metal clad switchgear, substations, motor control centers, medium-voltage motor starters and facility electrical systems.
How to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.
Proper selection, maintenance, testing, use, and storage of PPE. Learn their purposes and limitations.
How to inspect insulated tools and understand their limitations of use
How to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.
How to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.
How to perform absence-of-voltage testing to help ensure an electrically safe work condition.
Review OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110, 12 and 130.
Understand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety in the Workplace
2026-01-13 08:00 - 2026-01-14 16:00, 2026-03-10 08:00 - 2026-03-11 16:00
Previously: Electrical Safety for Qualified Electrical Workers (ESQEW) / NFPA 70E / CSA Z462 / Arc Flash Training
Tuition: $850*
Duration: 2 Days (8am – 4pm each day)
CEU: 1.6 Units
Prerequisites: It is recommended, but not mandatory that attendees should have some basic electrical training and field experience.
COURSE DESCRIPTION:
Designed for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications.
*Tuition price is for open enrollments, does not include costs for on-site bookings
COURSE LEARNING OBJECTIVES:

Recognize, understand and avoid electrical hazards and risks (shock, arc flash, and arc blast)
How to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.
Safe work practices for work on or near metal clad switchgear, substations, motor control centers, medium-voltage motor starters and facility electrical systems.
How to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.
Proper selection, maintenance, testing, use, and storage of PPE. Learn their purposes and limitations.
How to inspect insulated tools and understand their limitations of use
How to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.
How to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.
How to perform absence-of-voltage testing to help ensure an electrically safe work condition.
Review OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110, 12 and 130.
Understand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

Electrical Safety in the Workplace Labs
2026-01-15 08:00 - 16:00, 2026-02-12 08:00 - 16:00, 2026-03-12 08:00 - 16:00

Electrical Equipment Maintenance
2026-02-03 08:00 - 16:00, 2026-02-17 08:00 - 16:00, 2026-03-05 08:00 - 16:00, 2026-03-19 08:00 - 16:00
Formerly Known as: NFPA 70B / CSA Z463 / Electrical Maintenance Guidelines
Course Description: Comprehensive standards for electrical maintenance, with an emphasis on the following five areas:
Electrical equipment: standards for maintaining all types of electrical equipment, including transformers, circuit breakers, and switchgear.
Safety: guidance on identifying and mitigating electrical hazards.
Training: the importance of training personnel responsible for maintenance tasks and emphasizing the need for ongoing education and certification.
Maintenance procedures: standards for conducting regular maintenance, such as visual inspections, cleaning, lubrication, and testing.
Maintenance documentation: standards requiring detailed records of all maintenance activities, including test results, repairs, and replacements to ensure compliance and facilitate continuous improvement.
Prerequisites: An understanding of basic electrical theory and practical field knowledge of electrical installations. This is not a basic or beginner’s NEC course.

Electrical Safety in the Workplace
2026-02-10 08:00 - 2026-02-11 16:00
Previously known as: Electrical Safety for Qualified Electrical Workers (ESQEW) / NFPA 70E / CSA Z462 / Arc Flash Training
Tuition: $850*
Duration: 2 Days (8am – 4pm each day)
CEU: 1.6 Units
Prerequisites: It is recommended, but not mandatory that attendees should have some basic electrical training and field experience.
COURSE DESCRIPTION:
Designed for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications.
*Tuition price is for open enrollments, does not include costs for on-site bookings
COURSE LEARNING OBJECTIVES:

Recognize, understand and avoid electrical hazards and risks (shock, arc flash, and arc blast)
How to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.
Safe work practices for work on or near metal clad switchgear, substations, motor control centers, medium-voltage motor starters and facility electrical systems.
How to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.
Proper selection, maintenance, testing, use, and storage of PPE. Learn their purposes and limitations.
How to inspect insulated tools and understand their limitations of use
How to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.
How to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.
How to perform absence-of-voltage testing to help ensure an electrically safe work condition.
Review OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110, 12 and 130.
Understand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.

CONTACT US TO BOOK YOUR NEXT SESSION!
Get personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs.
(Pricing subject to change based on customization, first-come, first-serve basis, minimum charges apply)

2026 National Electrical Code (Virtual)
2026-02-25 08:00 - 2026-02-26 16:00, 2026-03-12 08:00 - 2026-03-13 16:00
Course Description: This course is designed to give new or experienced users of the National Electrical Code (NFPA70) practical experience in applying the rules in commercial and industrial applications. Through practical exercises, classroom instruction, and discussions, students will learn how to size conductors, motors, overcurrent protection and raceways for safe installations. Students will utilize chapters 1 through 4 of the Code book to become proficient in finding applicable sections for most applications. Chapter 9 tables are also covered so students can properly utilize them in everyday work situations. The practical exercises are designed to help students become familiar with the structure of the Code and how to quickly find the articles needed for common applications.
Prerequisites: An understanding of basic electrical theory and practical field knowledge of electrical installations. This is not a basic or beginner’s NEC course.
Course Learning Objectives:

Purpose, scope, and definitions of the NEC
Requirements for installations wiring and protection
Load calculations and overcurrent protection
Wiring methods, conductors, and Conductors in parallel
Underground installations
Raceway and box fill calculations
Conductors in parallel
Conductor ampacity correction and adjustment
Bonding and grounding Article 250
Switchboards, switchgear, and panelboards
Neutral conductor terminations
Motors, motor circuits, and controllers.
