BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Shermco Industries - ECPv6.15.11//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Shermco Industries
X-ORIGINAL-URL:https://shermco.com
X-WR-CALDESC:Events for Shermco Industries
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251202T080000
DTEND;TZID=America/New_York:20251203T160000
DTSTAMP:20260422T182536
CREATED:20251001T160244Z
LAST-MODIFIED:20251001T160244Z
UID:3507-1764662400-1764777600@shermco.com
SUMMARY:Electrical Safety for Qualified Electrical Workers
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-for-qualified-electrical-workers-24/
CATEGORIES:In-person United States
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251202T080000
DTEND;TZID=America/New_York:20251203T160000
DTSTAMP:20260422T182537
CREATED:20251001T160328Z
LAST-MODIFIED:20251001T160328Z
UID:3509-1764662400-1764777600@shermco.com
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual-12/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251204T080000
DTEND;TZID=America/New_York:20251204T160000
DTSTAMP:20260422T182537
CREATED:20251001T160113Z
LAST-MODIFIED:20251001T160113Z
UID:3501-1764835200-1764864000@shermco.com
SUMMARY:Electrical Safety for Qualified Electrical Workers Labs
DESCRIPTION:Tuition: $575*\nDuration: 1 Day (8am – 4pm)\nCEU: .8 Units\nLocation: Irving TX\nPrerequisites: Electrical Safety for Qualified Electrical Workers training course. \nCOURSE DESCRIPTION: \nTechnicians and supervisors are often hesitant to perform tasks on medium- voltage equipment without some prior training or experience. This one-day lab session pulls all the pieces together for planning and executing specific tasks on medium-voltage energized equipment. A planning session is followed by hands-on practice in Shermco’s training substation under the supervision of our field-experienced instructors. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nFocusing on medium-voltage applications\nHow to assemble all the components of an electrical safety program into a practical job plan\nHazard identification and risk assessment\nAbsence of voltage testing of medium-voltage switchgear\nGrounding of medium-voltage switchgear\nChanging medium-voltage air-switch fuses\nInserting and removing (racking) medium-voltage circuit breakers\nInspection of PPE and arc-rated clothing\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-for-qualified-electrical-workers-labs-20/
CATEGORIES:In-person United States
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251204T080000
DTEND;TZID=America/New_York:20251204T160000
DTSTAMP:20260422T182537
CREATED:20251001T160146Z
LAST-MODIFIED:20251001T160146Z
UID:3503-1764835200-1764864000@shermco.com
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
DESCRIPTION:Tuition: $550*\nDuration: 1 Days (8am – 4pm)\nCEU: .8 Units\nLocation: Virtual\nPrerequisites: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metal-clad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required personal protective equipment (PPE).\nEnergized and de-energized work policy and lockout/tagout (LOTO) requirements\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-virtual-10/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251205T080000
DTEND;TZID=America/New_York:20251205T160000
DTSTAMP:20260422T182537
CREATED:20251001T160035Z
LAST-MODIFIED:20251001T160035Z
UID:3498-1764921600-1764950400@shermco.com
SUMMARY:Electrical Safety for Managers & Supervisors (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: None \nCOURSE DESCRIPTION: \nAs is often the case\, supervisors\, managers\, and engineers who are responsible for plant maintenance are not actually the individuals performing hands-on maintenance operations. However\, it is critical that they understand workplace safety policies and regulations so they can plan for the direction and training requirements of maintenance staff and assure that proper PPE\, LOTO\, and other safety procedures are well understood and followed. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nHow electrical hazards in the can affect your personnel\, your company and those responsible for electrical workers.\nRecognize electrical safety hazards and plan a course of action to address each one.\nOSHA/CSA regulations and NFPA 70E requirements for taking specific measures to prevent electrical hazards from causing injury or death.\nElectrical hazard awareness and recognition.\nManaging liability created by electrical hazards.\nDesigning and implementing an Electrical Safety Program (ESP) including policies\, safe work procedures and permits\, hazard analysis\, risk assessments and reduction\, training\, PPE and other written program documents.\nPerforming an electrical hazard/risk analysis.\nUsing the NFPA 70E to interpret hazard/risk category classification (HRC) of a given task and assure adequate PPE.\nHow to incorporate changes implemented by the NFPA 70E update.\nIdentify the steps needed to protect employees who work on or near energized parts.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-for-managers-supervisors-virtual-5/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251209T080000
DTEND;TZID=America/New_York:20251212T160000
DTSTAMP:20260422T182537
CREATED:20251001T155841Z
LAST-MODIFIED:20251001T155841Z
UID:3496-1765267200-1765555200@shermco.com
SUMMARY:Industrial Plant Electrical Maintenance
DESCRIPTION:TUITION: $1420*\nDURATION: 4 Day (8am – 4pm)\nCEU: 3.2 Units\nPREREQUISITES: Students should have basic electrical training. Some field experience is recommended but not mandatory. \nCOURSE DESCRIPTION: \nThis course covers what maintenance personnel and managers should know about electrical maintenance and how it affects plant reliability. The maintenance and testing required for common plant devices\, including transformers\, protective relays\, circuit breakers\, cubicle maintenance\, motors and motor controls is covered in detail. Based on the NFPA 70E or B and ANSI/NETA Maintenance Testing Specifications\, this intensive training program provides the latest information on maintaining and testing electrical power system equipment\, including what to do\, when to do it and interpreting test results. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nLow- and medium-voltage circuit breakers.\nMotor maintenance\nSwitches and disconnects.\nTransformer maintenance and testing.\nHow to interpret results and trend analysis.\nHow to improve plant reliability through common-sense approaches to operation and maintenance.\nHow to lower operation and maintenance cost.\nHow maintenance planning can reduce unscheduled downtime.\nHands-on (~40%) training program augmented with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/industrial-plant-electrical-maintenance-3/
CATEGORIES:In-person United States
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251216T080000
DTEND;TZID=America/New_York:20251217T160000
DTSTAMP:20260422T182537
CREATED:20251001T155616Z
LAST-MODIFIED:20251001T155616Z
UID:3492-1765872000-1765987200@shermco.com
SUMMARY:Electrical Safety for Qualified Electrical Workers (Virtual)
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-for-qualified-electrical-workers-virtual-11/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251216T080000
DTEND;TZID=America/New_York:20251217T160000
DTSTAMP:20260422T182537
CREATED:20251001T155657Z
LAST-MODIFIED:20251001T155657Z
UID:3494-1765872000-1765987200@shermco.com
SUMMARY:Electrical Safety for Qualified Electrical Workers
DESCRIPTION:Tuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-for-qualified-electrical-workers-23/
CATEGORIES:In-person United States
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251218T080000
DTEND;TZID=America/New_York:20251218T160000
DTSTAMP:20260422T182537
CREATED:20251001T155444Z
LAST-MODIFIED:20251001T155444Z
UID:3488-1766044800-1766073600@shermco.com
SUMMARY:Electrical Safety for Qualified Electrical Workers Refresher (Virtual)
DESCRIPTION:Tuition: $550*\nDuration: 1 Days (8am – 4pm)\nCEU: .8 Units\nLocation: Virtual\nPrerequisites: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metal-clad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required personal protective equipment (PPE).\nEnergized and de-energized work policy and lockout/tagout (LOTO) requirements\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-for-qualified-electrical-workers-refresher-virtual-9/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251218T080000
DTEND;TZID=America/New_York:20251218T160000
DTSTAMP:20260422T182537
CREATED:20251001T155524Z
LAST-MODIFIED:20251001T155536Z
UID:3490-1766044800-1766073600@shermco.com
SUMMARY:Electrical Safety for Qualified Electrical Workers Labs
DESCRIPTION:Tuition: $575*\nDuration: 1 Day (8am – 4pm)\nCEU: .8 Units\nLocation: Irving TX\nPrerequisites: Electrical Safety for Qualified Electrical Workers training course. \nCOURSE DESCRIPTION: \nTechnicians and supervisors are often hesitant to perform tasks on medium- voltage equipment without some prior training or experience. This one-day lab session pulls all the pieces together for planning and executing specific tasks on medium-voltage energized equipment. A planning session is followed by hands-on practice in Shermco’s training substation under the supervision of our field-experienced instructors. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nFocusing on medium-voltage applications\nHow to assemble all the components of an electrical safety program into a practical job plan\nHazard identification and risk assessment\nAbsence of voltage testing of medium-voltage switchgear\nGrounding of medium-voltage switchgear\nChanging medium-voltage air-switch fuses\nInserting and removing (racking) medium-voltage circuit breakers\nInspection of PPE and arc-rated clothing\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-for-qualified-electrical-workers-labs-19/
CATEGORIES:In-person United States
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251219T080000
DTEND;TZID=America/New_York:20251219T160000
DTSTAMP:20260422T182537
CREATED:20251001T155411Z
LAST-MODIFIED:20251001T155411Z
UID:3486-1766131200-1766160000@shermco.com
SUMMARY:Electrical Safety for Non-Electrical Personnel (Virtual)
DESCRIPTION:TUITION: $550*\nDURATION: 1 Day (8am – 4pm)\nCEU: 0.8 Units\nPREREQUISITES: None \nCOURSE DESCRIPTION: \nVirtually every worker on an industrial or commercial job site works with or uses electrically powered equipment. Most of these workers have no concept of the hazards they could possibly be exposed to by performing common\, everyday tasks. Jewelry contacting energized components\, overstressed power strips\, coffee pots\, and heaters placed into the workplace all can increase the risk to the employee and to production if the worker is not aware of the potential issues involved. This course covers common situations that could place the non-electrical worker into dangerous situations. This course is primarily designed to meet the training requirements in NFPA 70E Section 110.2(A)(1)(C)(2). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings. \nCOURSE LEARNING OBJECTIVES: \n\nReview of electrical hazards\, their causes and the potential for injuries and fatalities.\nUnderstand how to avoid these hazards.\nCommon situations that can increase risk to workers.\n OSHA/CSA electrical safety-related work practices regulation as it applies to non-electrical personnel.\nUnderstand electrical LOTO and the Safe Work Zone.\nUnderstand applicable OSHA/CSA regulations for non-electrical workers.\nUnderstand and apply NFPA 70E requirements for unqualified persons.\nUnderstand the safe approach distances for shock\, arc flash\, arc-blast and the purpose of a safe work zone.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-for-non-electrical-personnel-virtual-7/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260105T080000
DTEND;TZID=America/New_York:20260105T160000
DTSTAMP:20260422T182537
CREATED:20251222T180106Z
LAST-MODIFIED:20251222T180106Z
UID:3752-1767600000-1767628800@shermco.com
SUMMARY:Electrical Safety Refresher (Virtual)
DESCRIPTION:Tuition: $550*\nDuration: 1 Days (8am – 4pm)\nCEU: .8 Units\nLocation: Virtual\nPrerequisites: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metal-clad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required personal protective equipment (PPE).\nEnergized and de-energized work policy and lockout/tagout (LOTO) requirements\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-refresher-virtual/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260106T080000
DTEND;TZID=America/New_York:20260107T160000
DTSTAMP:20260422T182537
CREATED:20251222T181803Z
LAST-MODIFIED:20251222T181803Z
UID:3777-1767686400-1767801600@shermco.com
SUMMARY:Electrical Safety in the Workplace (Virtual)
DESCRIPTION:Formerly Known As: ESQEW (Virtual)\nTuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-in-the-workplace-virtual/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260113T080000
DTEND;TZID=America/New_York:20260114T160000
DTSTAMP:20260422T182537
CREATED:20251222T180853Z
LAST-MODIFIED:20251222T180853Z
UID:3764-1768291200-1768406400@shermco.com
SUMMARY:Electrical Safety in the Workplace
DESCRIPTION:Previously: Electrical Safety for Qualified Electrical Workers (ESQEW) / NFPA 70E / CSA Z462 / Arc Flash Training\nTuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-in-the-workplace/
CATEGORIES:In-person United States
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260115T080000
DTEND;TZID=America/New_York:20260115T160000
DTSTAMP:20260422T182537
CREATED:20251222T181341Z
LAST-MODIFIED:20251222T181426Z
UID:3770-1768464000-1768492800@shermco.com
SUMMARY:Electrical Safety in the Workplace Labs
DESCRIPTION:Tuition: $575*\nDuration: 1 Day (8am – 4pm)\nCEU: .8 Units\nLocation: Irving TX\nPrerequisites: Electrical Safety for Qualified Electrical Workers training course. \nCOURSE DESCRIPTION: \nTechnicians and supervisors are often hesitant to perform tasks on medium- voltage equipment without some prior training or experience. This one-day lab session pulls all the pieces together for planning and executing specific tasks on medium-voltage energized equipment. A planning session is followed by hands-on practice in Shermco’s training substation under the supervision of our field-experienced instructors. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nFocusing on medium-voltage applications\nHow to assemble all the components of an electrical safety program into a practical job plan\nHazard identification and risk assessment\nAbsence of voltage testing of medium-voltage switchgear\nGrounding of medium-voltage switchgear\nChanging medium-voltage air-switch fuses\nInserting and removing (racking) medium-voltage circuit breakers\nInspection of PPE and arc-rated clothing\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-in-the-workplace-labs/
CATEGORIES:In-person United States
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260119T080000
DTEND;TZID=America/New_York:20260120T160000
DTSTAMP:20260422T182537
CREATED:20251222T181859Z
LAST-MODIFIED:20251222T181859Z
UID:3779-1768809600-1768924800@shermco.com
SUMMARY:Electrical Safety in the Workplace (Virtual)
DESCRIPTION:Formerly Known As: ESQEW (Virtual)\nTuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-in-the-workplace-virtual-2/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260121T080000
DTEND;TZID=America/New_York:20260121T160000
DTSTAMP:20260422T182537
CREATED:20251222T180201Z
LAST-MODIFIED:20251222T180325Z
UID:3754-1768982400-1769011200@shermco.com
SUMMARY:Electrical Safety Refresher (Virtual)
DESCRIPTION:Tuition: $550*\nDuration: 1 Days (8am – 4pm)\nCEU: .8 Units\nLocation: Virtual\nPrerequisites: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metal-clad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required personal protective equipment (PPE).\nEnergized and de-energized work policy and lockout/tagout (LOTO) requirements\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-refresher-virtual-2/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260203T080000
DTEND;TZID=America/New_York:20260203T160000
DTSTAMP:20260422T182537
CREATED:20251222T182906Z
LAST-MODIFIED:20251222T183305Z
UID:3789-1770105600-1770134400@shermco.com
SUMMARY:Electrical Equipment Maintenance
DESCRIPTION:Formerly Known as: NFPA 70B / CSA Z463 / Electrical Maintenance Guidelines \nCourse Description: Comprehensive standards for electrical maintenance\, with an emphasis on the following five areas: \nElectrical equipment: standards for maintaining all types of electrical equipment\, including transformers\, circuit breakers\, and switchgear. \nSafety: guidance on identifying and mitigating electrical hazards. \nTraining: the importance of training personnel responsible for maintenance tasks and emphasizing the need for ongoing education and certification. \nMaintenance procedures: standards for conducting regular maintenance\, such as visual inspections\, cleaning\, lubrication\, and testing. \nMaintenance documentation: standards requiring detailed records of all maintenance activities\, including test results\, repairs\, and replacements to ensure compliance and facilitate continuous improvement. \nPrerequisites: An understanding of basic electrical theory and practical field knowledge of electrical installations. This is not a basic or beginner’s NEC course.
URL:https://shermco.com/training-catalog/electrical-equipment-maintenance/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260204T080000
DTEND;TZID=America/New_York:20260205T160000
DTSTAMP:20260422T182537
CREATED:20251222T181940Z
LAST-MODIFIED:20251222T181940Z
UID:3781-1770192000-1770307200@shermco.com
SUMMARY:Electrical Safety in the Workplace (Virtual)
DESCRIPTION:Formerly Known As: ESQEW (Virtual)\nTuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-in-the-workplace-virtual-3/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260206T080000
DTEND;TZID=America/New_York:20260206T160000
DTSTAMP:20260422T182537
CREATED:20251222T180305Z
LAST-MODIFIED:20251222T180305Z
UID:3756-1770364800-1770393600@shermco.com
SUMMARY:Electrical Safety Refresher (Virtual)
DESCRIPTION:Tuition: $550*\nDuration: 1 Days (8am – 4pm)\nCEU: .8 Units\nLocation: Virtual\nPrerequisites: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metal-clad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required personal protective equipment (PPE).\nEnergized and de-energized work policy and lockout/tagout (LOTO) requirements\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-refresher-virtual-3/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260210T080000
DTEND;TZID=America/New_York:20260211T160000
DTSTAMP:20260422T182537
CREATED:20251222T181103Z
LAST-MODIFIED:20251222T181103Z
UID:3766-1770710400-1770825600@shermco.com
SUMMARY:Electrical Safety in the Workplace
DESCRIPTION:Previously known as: Electrical Safety for Qualified Electrical Workers (ESQEW) / NFPA 70E / CSA Z462 / Arc Flash Training\nTuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-in-the-workplace-2/
CATEGORIES:In-person United States
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260212T080000
DTEND;TZID=America/New_York:20260212T160000
DTSTAMP:20260422T182537
CREATED:20251222T181428Z
LAST-MODIFIED:20251222T181428Z
UID:3773-1770883200-1770912000@shermco.com
SUMMARY:Electrical Safety in the Workplace Labs
DESCRIPTION:Tuition: $575*\nDuration: 1 Day (8am – 4pm)\nCEU: .8 Units\nLocation: Irving TX\nPrerequisites: Electrical Safety for Qualified Electrical Workers training course. \nCOURSE DESCRIPTION: \nTechnicians and supervisors are often hesitant to perform tasks on medium- voltage equipment without some prior training or experience. This one-day lab session pulls all the pieces together for planning and executing specific tasks on medium-voltage energized equipment. A planning session is followed by hands-on practice in Shermco’s training substation under the supervision of our field-experienced instructors. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nFocusing on medium-voltage applications\nHow to assemble all the components of an electrical safety program into a practical job plan\nHazard identification and risk assessment\nAbsence of voltage testing of medium-voltage switchgear\nGrounding of medium-voltage switchgear\nChanging medium-voltage air-switch fuses\nInserting and removing (racking) medium-voltage circuit breakers\nInspection of PPE and arc-rated clothing\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-in-the-workplace-labs-2/
CATEGORIES:In-person United States
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260216T080000
DTEND;TZID=America/New_York:20260216T160000
DTSTAMP:20260422T182537
CREATED:20251222T180438Z
LAST-MODIFIED:20251222T180438Z
UID:3758-1771228800-1771257600@shermco.com
SUMMARY:Electrical Safety Refresher (Virtual)
DESCRIPTION:Tuition: $550*\nDuration: 1 Days (8am – 4pm)\nCEU: .8 Units\nLocation: Virtual\nPrerequisites: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metal-clad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required personal protective equipment (PPE).\nEnergized and de-energized work policy and lockout/tagout (LOTO) requirements\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-refresher-virtual-4/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260217T080000
DTEND;TZID=America/New_York:20260217T160000
DTSTAMP:20260422T182537
CREATED:20251222T183003Z
LAST-MODIFIED:20251222T183352Z
UID:3791-1771315200-1771344000@shermco.com
SUMMARY:Electrical Equipment Maintenance
DESCRIPTION:Formerly Known as: NFPA 70B / CSA Z463 / Electrical Maintenance Guidelines \nCourse Description: Comprehensive standards for electrical maintenance\, with an emphasis on the following five areas: \nElectrical equipment: standards for maintaining all types of electrical equipment\, including transformers\, circuit breakers\, and switchgear. \nSafety: guidance on identifying and mitigating electrical hazards. \nTraining: the importance of training personnel responsible for maintenance tasks and emphasizing the need for ongoing education and certification. \nMaintenance procedures: standards for conducting regular maintenance\, such as visual inspections\, cleaning\, lubrication\, and testing. \nMaintenance documentation: standards requiring detailed records of all maintenance activities\, including test results\, repairs\, and replacements to ensure compliance and facilitate continuous improvement. \nPrerequisites: An understanding of basic electrical theory and practical field knowledge of electrical installations. This is not a basic or beginner’s NEC course.
URL:https://shermco.com/training-catalog/electrical-equipment-maintenance-2/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260219T080000
DTEND;TZID=America/New_York:20260220T160000
DTSTAMP:20260422T182537
CREATED:20251222T182045Z
LAST-MODIFIED:20251222T182551Z
UID:3783-1771488000-1771603200@shermco.com
SUMMARY:Electrical Safety in the Workplace (Virtual)
DESCRIPTION:Formerly Known As: ESQEW (Virtual)\nTuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-in-the-workplace-virtual-4/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260225T080000
DTEND;TZID=America/New_York:20260226T160000
DTSTAMP:20260422T182537
CREATED:20251222T183551Z
LAST-MODIFIED:20251222T183551Z
UID:3804-1772006400-1772121600@shermco.com
SUMMARY:2026 National Electrical Code (Virtual)
DESCRIPTION:Course Description: This course is designed to give new or experienced users of the National Electrical Code (NFPA70) practical experience in applying the rules in commercial and industrial applications. Through practical exercises\, classroom instruction\, and discussions\, students will learn how to size conductors\, motors\, overcurrent protection and raceways for safe installations. Students will utilize chapters 1 through 4 of the Code book to become proficient in finding applicable sections for most applications. Chapter 9 tables are also covered so students can properly utilize them in everyday work situations. The practical exercises are designed to help students become familiar with the structure of the Code and how to quickly find the articles needed for common applications. \nPrerequisites: An understanding of basic electrical theory and practical field knowledge of electrical installations. This is not a basic or beginner’s NEC course. \nCourse Learning Objectives: \n\nPurpose\, scope\, and definitions of the NEC\nRequirements for installations wiring and protection\nLoad calculations and overcurrent protection\nWiring methods\, conductors\, and Conductors in parallel\nUnderground installations\nRaceway and box fill calculations\nConductors in parallel\nConductor ampacity correction and adjustment\nBonding and grounding Article 250\nSwitchboards\, switchgear\, and panelboards\nNeutral conductor terminations\nMotors\, motor circuits\, and controllers.
URL:https://shermco.com/training-catalog/2026-national-electrical-code-virtual/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260302T080000
DTEND;TZID=America/New_York:20260302T160000
DTSTAMP:20260422T182537
CREATED:20251222T180521Z
LAST-MODIFIED:20251222T180521Z
UID:3760-1772438400-1772467200@shermco.com
SUMMARY:Electrical Safety Refresher (Virtual)
DESCRIPTION:Tuition: $550*\nDuration: 1 Days (8am – 4pm)\nCEU: .8 Units\nLocation: Virtual\nPrerequisites: Attendees should have completed OSHA-mandated electrical safety training (Electrical Safety for Qualified Electrical Workers class or equivalent). \nCOURSE DESCRIPTION: \nThis one-day class is designed for those who have previously met the OSHA mandated training requirements of NFPA 70E and need to be re-certified. It is a concise review of the concepts and practices required for safe electrical work. This course is designed to meet the training requirements in NFPA 70E Section 110.2(D)(3). \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nElectrical hazards and safety procedures for work on metal-clad switchgear\, substations\, motor control centers and facility electrical systems.\nProper selection\, maintenance and use of required personal protective equipment (PPE).\nEnergized and de-energized work policy and lockout/tagout (LOTO) requirements\nSafe use of portable electrical equipment\, including inspection and testing.\nReview of OSHA Electrical Safety-Related Work Practice regulations (29CFR1910.331-.335) as well as Articles 110\, 120 and 130 of the NFPA 70E\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-refresher-virtual-5/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260303T080000
DTEND;TZID=America/New_York:20260304T160000
DTSTAMP:20260422T182537
CREATED:20251222T182126Z
LAST-MODIFIED:20251222T182126Z
UID:3785-1772524800-1772640000@shermco.com
SUMMARY:Electrical Safety in the Workplace (Virtual)
DESCRIPTION:Formerly Known As: ESQEW (Virtual)\nTuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-in-the-workplace-virtual-5/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260305T080000
DTEND;TZID=America/New_York:20260305T160000
DTSTAMP:20260422T182537
CREATED:20251222T183027Z
LAST-MODIFIED:20251222T183335Z
UID:3793-1772697600-1772726400@shermco.com
SUMMARY:Electrical Equipment Maintenance
DESCRIPTION:Formerly Known as: NFPA 70B / CSA Z463 / Electrical Maintenance Guidelines \nCourse Description: Comprehensive standards for electrical maintenance\, with an emphasis on the following five areas: \nElectrical equipment: standards for maintaining all types of electrical equipment\, including transformers\, circuit breakers\, and switchgear. \nSafety: guidance on identifying and mitigating electrical hazards. \nTraining: the importance of training personnel responsible for maintenance tasks and emphasizing the need for ongoing education and certification. \nMaintenance procedures: standards for conducting regular maintenance\, such as visual inspections\, cleaning\, lubrication\, and testing. \nMaintenance documentation: standards requiring detailed records of all maintenance activities\, including test results\, repairs\, and replacements to ensure compliance and facilitate continuous improvement. \nPrerequisites: An understanding of basic electrical theory and practical field knowledge of electrical installations. This is not a basic or beginner’s NEC course.
URL:https://shermco.com/training-catalog/electrical-equipment-maintenance-3/
CATEGORIES:United States Virtual
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260310T080000
DTEND;TZID=America/New_York:20260311T160000
DTSTAMP:20260422T182537
CREATED:20251222T181159Z
LAST-MODIFIED:20251222T181159Z
UID:3768-1773129600-1773244800@shermco.com
SUMMARY:Electrical Safety in the Workplace
DESCRIPTION:Previously: Electrical Safety for Qualified Electrical Workers (ESQEW) / NFPA 70E / CSA Z462 / Arc Flash Training\nTuition: $850*\nDuration: 2 Days (8am – 4pm each day)\nCEU: 1.6 Units\nPrerequisites: It is recommended\, but not mandatory that attendees should have some basic electrical training and field experience. \nCOURSE DESCRIPTION: \nDesigned for all maintenance and testing personnel who work on or near electrical equipment. This seminar meets and exceeds the basic OSHA/CSA-mandated electrical safety training. All of the concepts of electrical safety are carefully explained in both classroom and hands-on sessions. These assure that the skills and knowledge can be demonstrated to meet the OSHA/CSA requirements. The basic class and lab is primarily focused on applications below 600 volts\, but an optional one day lab session is available for understanding and demonstrating the special skills and knowledge required for medium voltage applications. \n*Tuition price is for open enrollments\, does not include costs for on-site bookings \nCOURSE LEARNING OBJECTIVES: \n\nRecognize\, understand and avoid electrical hazards and risks (shock\, arc flash\, and arc blast)\nHow to develop and implement a JSA/JHA to address hazards and plan the required steps needed to work safely on or near energized conductors and circuit components.\nSafe work practices for work on or near metal clad switchgear\, substations\, motor control centers\, medium-voltage motor starters and facility electrical systems.\nHow to place equipment in an electrically safe work condition and properly utilize lockout/tagout (LOTO) requirements.\nProper selection\, maintenance\, testing\, use\, and storage of PPE. Learn their purposes and limitations.\nHow to inspect insulated tools and understand their limitations of use\nHow to select and apply temporary grounds as well as specific equipment grounding hazards including step and touch potentials.\nHow to use a transformer short circuit current/incident energy calculator and how to estimate incident energy under field work conditions.\nHow to perform absence-of-voltage testing to help ensure an electrically safe work condition.\nReview OSHA/CSA Electrical Safety Related Work Practice regulations (29CFR 1910.311-.335 as well as Articles 110\, 12 and 130.\nUnderstand the current utilization of NFPA 70E and the annex tables. Seminar-based program with round-table discussions.\n\nCONTACT US TO BOOK YOUR NEXT SESSION! \nGet personalized support and guidance for your team at your plant or ours! Contact TrainingServices@Shermco.com and we’ll work with you to find a plan that suits your needs. \n(Pricing subject to change based on customization\, first-come\, first-serve basis\, minimum charges apply)
URL:https://shermco.com/training-catalog/electrical-safety-in-the-workplace-3/
CATEGORIES:In-person United States
END:VEVENT
END:VCALENDAR